HOME PRODUCTS Products Info > High-Speed Stamping Press/High-Speed Tryout Press

High-Speed Stamping Press
High-Speed Tryout Press

Click on the image to enlarge it.

24000kN High-Speed Hydraulic Lead Press
Single,Double/15SPM
【Table Size】4,800×2,500mm

20000kN High-Speed Tryout Press
【Table Size】4,600×2,300mm

24000kN High-Speed Tryout Press
【Table Size】4,600×2,600mm

16000kN High-Speed Tryout Press
【Table Size】4,500×2,500mm

15000kN High-Speed Tryout Press
【Table Size】4,500×2,500mm

20000kN High-Speed Tryout Press
【Table Size】4,600×2,300mm

25000kN High-Speed Tryout Press
【Table Size】5,000×2,500mm

16000kN High-Speed Tryout Press
【Table Size】4,600×2,200mm

16000kN High-Speed Tryout Press
【Table Size】3,700×2,250mm

15000kN High-Speed Hydraulic Press
Lead Press in Tandem Line
【Table Size】4,000×2,500mm

20000kN High-Speed Hydraulic Press

One 10000kN×5000kN Double Action Press and Three 8000kN Single Action Presses
【Table Size】3,500×2,000mm

24000kN High-Speed Tryout Press
【Table Size】4,600×2,600mm

High-Speed Stamping Press

Special Features

This press is designed to achieve high speed, high accuracy high performance, high reliability and low noise. The servo control system is employed and the high productivity nearly equal to the mechanical press can be obtained.

Productivity

  • The capacity of selection required pressing capacity automatically in conjunction with the high speed up/down cylinders will always provide the optimum cycle time. 12 to 15 spm depending upon the forming conditions can be obtained.
  • Forming condition on Pressure, Speed, Stroke can be set freely.
  • High competency in Drawing Performance is suitable for forming High-Tension material and Aluminum.
  • Time for Die-Height adjustment is needless.
  • Maintenance is easy with simple composition.
  • Lower-grade material and smaller-sized blank can be used compared with Mechanical Press.

Control

Pump Action by Electric-Hydraulic Servomechanism realizes Automatic Control Operation. 512 data patterns of DIEs can be uploaded and downloaded by Preset Programming.

Usability

Setting up data and Monitoring can be operated easily with Graphic Touch Panel.

Structure

Frames are designed with high rigidity to correspond to High Cycle Operation.

System

High-Speed Tryout Press

Special Features

  • Pressing Speed is as high as Mechanical Press's (400¡Á600mm/sec) with use of Accumulator.
  • Simulation of Mechanical Press is available by use of both Servo Logic Valve Control and Air Cushion.
  • This Press is also usable as a Production Press for backup.

Accumulator Mode